Kent · Ductwork cleaning
Duct cleaning in Brattle
Our technicians work in Brattle on ductwork cleaning. Out-of-hours visits, a fixed quote and a written report with pictures on every job.
- Hardened, baked-on grease in long horizontal runs
- Proof of duct cleaning for the insurer
- Duct runs with no cleaning record
Ductwork cleaning in Brattle, done properly
Once air leaves the canopy, it travels through ductwork that most people never see. Grease settles along every metre of it, and that is where a kitchen fire can travel. Our ductwork cleaning reaches inside the runs and risers through access panels, to BESA TR19® Grease. Typical jobs include a grease test showing the duct is overdue and duct runs that can’t be reached, on horizontal duct runs, access panels and bends and junctions.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, where grease settles in the flat sections. Access, parking and timings are agreed before the day.
For insurers and inspectors, the record counts. So every job comes with a written report and pictures, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Where
- Brattle (TN26)
- Region
- Kent
- Records
- TR19® certificate and photo report
- Price
- Fixed quote, usually within a working day
- When we work
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
FAQs for Brattle
Do you do school kitchen extract cleaning in Brattle in the summer holidays?
Yes, and it’s the easiest time to do it. Around Brattle, the Food Standards Agency lists about 2 schools and colleges with registered kitchens within a mile and a half or so. Just phone us on 0345 646 2711, or email photos with your term dates and we’ll plan around them.
Which council inspects kitchens in Brattle?
The local authority for Brattle is Ashford council, and its environmental health team does the inspecting. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.
Do you cover Brattle?
Yes. Our technicians work in Brattle, within the South East and London area we cover.
What information do you need?
Only a few details: the address, the site type, your opening hours and how we reach the system. Photos and the last report help too. Then phone us on 0345 646 2711 or drop us a line.
Do you have insurance?
Yes. Full insurance covers our work, and we’ve been trading since 2009.
How do you clean inside the ductwork?
After a survey and grease readings, the duct is opened up through its access panels. Each run and riser is scraped and degreased, then the readings are repeated.
What does ductwork cleaning cost?
We do not publish prices, because the cost depends on the job: the size of the system, its condition, access and when we can work. We fix the price before we start.
Can one contract cover all our sites?
Yes. One number covers all your sites across London and the South East, with visits on a regular schedule.
What else we do in Brattle
What the work involves, part by part
Access panels
We can fit new access panels where the duct needs them, so the next clean reaches more of the system. We will recommend where they should go.
Horizontal duct runs
A long flat run cannot be cleaned from one end. Where the gaps between panels are too long, we record what couldn’t be reached and can fit extra panels.
What affects the quote in Brattle
Your quote is based on your site. We take into account:
- Site requirements such as sign-in and permits
- One-off work versus a regular cycle
- The scale of the work
- What state the system is in
Every site is different, so we price each one individually. Size, access, the condition of the system and when we can work all play a part.
What to send for a quote
A few details help us quote accurately. When you get in touch, it helps to send:
- The times we could work without disrupting the site
- Detail shots of panels, filters and grilles
- Any symptoms, from odd noises to smells or leaks
- Wide photos of the system and the area around it
If you need ductwork cleaning in Brattle, give us a ring on 0345 646 2711 or use the quote form. Let us know the site type and the opening hours, plus photos or the previous report if they’re to hand. We typically send a fixed quote within one working day.
Ductwork cleaning in Brattle: the local picture
Food hygiene inspections in Brattle are the job of Ashford council’s environmental health team. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. Before-and-after photos from each clean are a simple way to show the extract is in hand. About 48 miles out from central London, Brattle is part of the South East area we work across. We work evenings, overnight and at weekends, so the visit fits around the site.
School kitchens, at schools like Woodchurch Church of England Primary School for example, are usually cleaned in the holidays so no lunches are lost. Where a hall near Parish Church of All Saints, or anywhere in Brattle, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Brattle is about 6 miles south-west of Ashford, in Kent. Anywhere in TN26, we can take on ductwork cleaning. 922 places in Kent are on our list, from busy centres to quieter spots. For sites nearby, see our Maidstone page, about 17 miles away.
Work in TN26 follows the same survey, fixed quote and written report as everywhere else we cover. Whether your site is on Front Road, Lower Road and Appledore Road or a nearby road, our technicians can take on the work. Other places close to Brattle include Woodchurch (1 mile north), Brook Street (1 mile west), Shirkoak (1 mile north), Appledore Heath (2 miles south) and Reading Street (3 miles south-west). Within a short drive, we also cover Ashford (6 miles north-east), Hythe (13 miles east), Tenterden (4 miles west), Park Wood (15 miles north-west), Kennington (8 miles north-east) and New Romney (9 miles south-east).
Local landmarks in Brattle
In Brattle, that means kitchens and buildings near Stonebridge Inn. For rail, the closest station is Appledore (Kent) station, about 3.1 miles south-east. Nearby you will also find Woodchurch Village Life Museum (1 mile north-west). The countryside around Brattle includes Orlestone Forest.
How it works
On the day, we arrive at the time agreed with you, which is often after service, overnight or at a weekend. Equipment that has to be off is switched off and allowed to cool before we start, and the area around the work is covered and protected. On site, it takes a few hours for a short run, longer for long runs and tall risers. A few pictures of the system help us make the most of a visit to a place like Brattle.
- Diagnosis: a survey of the duct’s route, size and access.
- A fixed quote follows, based on what we found.
- We clean section by section, working from panel to panel.
- We take extra care at bends and at the foot of risers.
- The duct is signed off with readings, photos and a next clean date.
Before we arrive
- Move anything stored near the system
- Mention any sign-in, permit or induction we need
- Mention any locked doors, roof access or ceiling voids
How to get a quote
Quoting starts with a diagnosis, either from photos and details you send or from a site visit. Then we send a fixed price, before any work starts.
Read more
For landlords and multi-site operators
We also work for facilities teams across offices, schools and healthcare in Brattle and across Kent. Larger estates can be phased building by building to keep disruption down.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we are happy to quote for all of it.
Do you need ductwork cleaning in Brattle?
The further the air travels from the cooking, the cooler it gets. Cooling air drops its grease onto the inside of the duct, so duct runs keep collecting grease long after the canopy.
What we’re most often called out for:
- Gaps where access panels were never fitted
- A duct clean needed for an insurer
- Hardened, baked-on grease in long horizontal runs
- Ductwork that has never been cleaned
Historic houses near Brattle, such as Smallhythe Place about 4.1 miles south-west, are a reminder that older buildings with event kitchens can have long, awkward duct routes.
Questions to ask before you book
- Whether VAT is included
- If the quote is a fixed price or an estimate
- Whether they recommend a next date
- Whether inaccessible sections are listed on the report
Leave it or put it right?
Under BESA guidance, the mean grease level should stay at or below 200 microns between cleans. Anywhere that reaches 500 microns or more needs immediate spot cleaning. Leaving the duct makes those limits harder to keep to. A planned visit to Brattle is easier to arrange than an emergency callout.
We do not list prices on the website, because the cost depends on the site in front of us. Call for a fixed quote, and we will talk you through it.
Why book with us
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Fixed quotes, usually within one working day
- Full insurance on every job
- Evenings, overnight and weekends, plus 24/7 emergency callout
See how cleaning jobs are priced or our accreditations and certificates.
Looking after it afterwards
Results last longer with the right care. Here’s what we suggest:
- Do not block access panels with shelving or stock
- Have the grease measured if cooking hours go up
- Make sure filters are seated properly
- Flag drips from the duct straight away
Access panels are closed and sealed back up after cleaning, and the surrounding area is left clean. Grease and dirty water are contained and removed.
Extra access panels mean more of the duct gets cleaned each time. Grease you can reach is grease that gets removed.