Oxfordshire · Air handling unit cleaning

Stoke Row AHU cleaning

Looking for AHU cleaning in Stoke Row? We survey first, give you a fixed quote and work around your opening hours, then sign off with a report and photos.

  • Leaves and litter drawn into the unit
  • Air handling units due a clean after building work
  • Air handling units never cleaned inside

Book AHU cleaning in Stoke Row

AHU cleaning in Stoke Row, done properly

Units vary a lot in size, age and layout, from a small ceiling-mounted unit to a large rooftop plant. Every job starts with a survey, from pictures or on site, followed by a fixed quote, so you know where you stand. We are often asked to deal with condensate trays that won’t empty and dust-coated heating and cooling coils, on dampers and louvres, internal panels and filter sections.

Work in a small place like Stoke Row starts with agreeing access and timings.

Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.

Before and after view down the inside of a rectangular extract duct
Place
Stoke Row (RG9, RG8)
Wider area
Oxfordshire
Paperwork
Written report with photos
Price
A fixed quote up front
Working hours
When your site is closed, plus a 24/7 line
Telephone
0345 646 2711
Reviewed
30 October 2026

What a clean will not put right

An honest diagnosis matters more to us than a booking, so here’s what AHU cleaning won’t do:

  • Controls and BMS settings that run the unit
  • Airflow problems caused by the system’s design
  • Coils that are corroded or leaking and need replacing

Not sure which it is? You can give us a ring on 0345 646 2711 or drop us a line and we will tell you honestly before booking.

What we work on in Stoke Row

  • Heating and cooling coils
  • Filter sections
  • Supply and extract fans
  • Dampers and louvres
  • Drain trays
  • Internal panels

Stoke Row: your questions answered

Do you cover smaller places like Stoke Row?

Yes, smaller places are covered as well as towns. A survey first, from pictures or a visit, means we arrive with the right kit.

Is Stoke Row in your area for AHU cleaning?

Yes. Our area runs across London and the South East, Stoke Row included. A fixed quote usually follows within one working day of the survey details.

Do you work with multi-site operators?

Yes. One number covers all your sites in our area, with visits on a regular schedule.

Can you clean the AHU out of hours?

Yes. The clean is planned around when the unit can be switched off. Healthcare and care settings are planned with staff.

How much does AHU cleaning cost?

The cost depends on the size of the system, its condition, access and timing. Call for a fixed quote, normally ready within one working day.

Do you give a certificate after the clean?

Yes, a TR19® certificate and a photo report. The report also suggests when the unit should next be inspected.

Can you clean the ducts connected to the AHU?

Yes, the ductwork, grilles and diffusers the unit serves. We’ll tell you after the survey whether the ducts need it.

How often do AHUs need cleaning?

Under TR19® Air, cleaning is led by inspection and risk rather than a set calendar. We recommend a next date in each report.

AHU cleaning around Stoke Row

We cover Stoke Row, about 40 miles from central London, as part of our work across London and the South East. A survey and a fixed quote come first, then the visit at a time that suits you.

If you manage a school such as Stoke Row Church of England School, ventilation cleaning is best booked for the holidays.

Stoke Row is about 6 miles north-west of Caversham, in Oxfordshire. From the centre of Stoke Row to the outskirts, AHU cleaning is available to all kinds of commercial premises, from small sites to large estates. Across Oxfordshire, we cover 443 places, Stoke Row among them. Our Reading page covers sites nearby (7 miles or so).

Our technicians cover all of the RG9 and RG8 postcode area for AHU cleaning and the streets around it. We cover sites on Main Street, Nottwood Lane and Busgrove Lane and nearby roads. Close by, we work in Checkendon (1 mile west), Heath End (2 miles north-west), Hook End (2 miles south-west), Nuffield (2 miles north) and Gallowstree Common (2 miles south). Within a short drive, we also cover Didcot (11 miles west), Abingdon-on-Thames (14 miles north-west), Thame (14 miles north), Henley-on-Thames (5 miles east), Benson (6 miles north-west) and Chinnor (11 miles north-east).

Local landmarks in Stoke Row

Locally, jobs take us to businesses close to Cherry Tree Public House, among other places. For a walk, there’s Warburg Nature Reserve.

Map of Stoke Row © OpenStreetMap contributors

What happens on the day

Protection comes first: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. The work on site takes half a day to a full day per unit, with large plant planned over several shifts, and the area is cleaned down before we leave. If the van will struggle with a lane or gateway near Stoke Row, let us know and we’ll plan around it.

  1. We survey the unit from photos or on site and agree what’s included.
  2. The unit is shut down with your site team and the area protected.
  3. Filters, coils, fan section and casing are cleaned in turn.
  4. We clean out the drain tray and make sure it drains.
  5. You get a TR19® certificate and a photo report.

Preparing for the visit

  • Allow time for equipment near the work to be turned off and cool down
  • Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
  • Mention any parking or loading restrictions

Get a fixed quote

To help us quote: where the site is, what it is and its opening hours, pictures of the system and any previous report or certificate. Once you have those, ring 0345 646 2711, or send details by email.

Get a quick quote

Advice

Do you need AHU cleaning in Stoke Row?

Whatever surrounds a building in Stoke Row, the air drawn into its AHU carries dust, pollen and debris. The intake section and first filters take the brunt, and the finer material travels on.

If you notice any of these, it’s worth a diagnosis:

  • Intake sections clogged with outdoor debris
  • Dirty filters cutting the airflow
  • Plant that needs cleaning after a refit
  • Dirty fans and fan housings

For buildings in and around Stoke Row, TR19® Air cleaning starts with an inspection.

Comparing quotes

  • Whether the whole system is included, or only the parts that are easy to reach
  • Whether they recommend a next date
  • Whether VAT is included
  • Whether a written report and photos are included

Choosing a duct cleaning contractor

Keeping the system healthy

Once we have finished, these simple steps help:

  • Stick to the filter change plan
  • Make sure condensate is draining away
  • Plan the next inspection before the last report gets filed away
  • Flag stale or damp smells in the supply air

Restart the unit with your site team or maintenance contractor once we have finished. Check the drain tray is emptying over the first few days to make sure it stays clear.

Make sure access doors and panels on the unit open easily. If a section is hard to get into, it tends not to get checked.

How the job changes from site to site

Filters

Dirty filters cut airflow and let dirt slip past their frames. We clean the frames and rails so the filters sit tight.

Fans and fan sections

The fan section is cleaned with the unit switched off and isolated with your site team.

For landlords and multi-site operators

Keeping records across a portfolio is half the battle. Each visit produces a dated report with photos, so you can show an insurer or inspector what was done at each site.

Multi-site operators often want one contractor and one number. We work across London and the South East, so visits at different addresses can be planned together and kept to a regular schedule.

In-house cleaning or a specialist?

Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they can’t safely do is clean inside the ductwork, the fan or the risers, which is where we come in.

Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. That’s our job.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London