Hampshire · Air handling unit cleaning

Air handling unit cleaning in Gosport, Hampshire

Cleaning of air handling units, including filters, coils, drain trays, fans and internal surfaces for businesses, landlords and public buildings in Gosport. CHAS, SafeContractor and ISO 9001, and fully insured.

  • Units that have only ever had filter changes
  • Leaves and litter drawn into the unit
  • Fan sections that haven’t been cleaned in years

Need AHU cleaning in Gosport?

What happens if it’s left?

Dirt left in an air handling unit does not stay in the unit. It’s carried through the ductwork and out of the grilles, which is why the unit and the ducts are best cleaned together. Systems in rural buildings are often out of sight and out of mind.

The cost depends on how big the system is, the condition it’s in and how easy it is to reach. We give you a fixed price before any work starts, so you know where you stand.

What you get with us

  • Fixed quotes, normally within one working day
  • Every visit written up, with pictures
  • CHAS, SafeContractor and ISO 9001
  • One number for every site across the South East and London

Read what affects the cost or how to check a contractor.

How we handle AHU cleaning in Gosport

The fan pushes every bit of air in the system, so dirt on the impeller and housing gets spread around. We clean the fan section along with the rest of the unit, with the unit switched off and made safe first. If you are dealing with dirty filters cutting the airflow and dust built up on fan impellers, we can help.

Work in a small place like Gosport starts with agreeing access and timings.

Our accreditations include CHAS, SafeContractor and ISO 9001, and we are fully insured. We’re also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.

Location
Gosport (SO51)
Wider area
Hampshire
Reporting
Photo report after every visit
Price
A fixed price before any work starts
Working hours
Overnight and weekend work, 24/7 emergency callout
Telephone
0345 646 2711
Page updated
30 October 2026
Extract duct interior shown dirty and then cleaned back to bare metal

What AHU cleaning looks like in Gosport

The FSA’s food hygiene register lists about 5 caring premises (care homes, nurseries and hospitals) with registered kitchens or food service in Gosport and the streets around it, up to about 1.5 miles out. Busy, occupied buildings like these are where clean supply air matters most. About 2.2 miles west of Gosport is Romsey Community Hospital, the nearest hospital. Clean air matters most where people are unwell, and that is as true in a care home as in a hospital.

If you manage a school such as Ampfield Church of England Primary School, ventilation cleaning is best booked for the holidays.

Gosport is about 2 miles east of Romsey, in Hampshire. Whatever kind of site you run in Gosport, we can take on AHU cleaning. We can work out of hours so trading isn’t interrupted. Across Hampshire, we cover 683 places, and Gosport is one of them. Southampton is in our area too, about 6 miles from Gosport.

Here we cover the SO51 postcode area for AHU cleaning. If your site is just outside Gosport, we cover Ampfield (1 mile north-east), Crampmoor (1 mile west), Knapp (1 mile north-east), Broadgate (1 mile east) and Lower Slackstead (2 miles north). Within a short drive, we also cover Winchester (6 miles north-east), Eastleigh (5 miles south-east), Fareham (15 miles south-east), Andover (14 miles north), Totton (7 miles south-west) and Hedge End (8 miles south-east).

Near you in Gosport

Around Gosport, our work takes us to kitchens and buildings near White Horse Public House and The Mountbatten School and the streets around them. Gosport’s nearest station is Chandlers Ford station, about 2.6 miles south-east of the centre. Well-known places in the area include King Johns House (2.9 miles west) and Romsey Community Hospital (2.2 miles west). Open spaces near Gosport include Emer Bog and Baddesley Common.

Map of Gosport © OpenStreetMap contributors

Signs you need AHU cleaning in Gosport

Wherever there’s a cooling coil, there’s condensate. A blocked outlet or a badly sloped tray leaves standing water, and slime and smells soon follow.

Common reasons sites call us are:

  • Units that have only ever had filter changes
  • Debris and leaves in the fresh air intake
  • Filters that are clogged or overdue
  • Dust built up on fan impellers

Hospitals such as Romsey Community Hospital (about 2.2 miles west) show how much a building can rely on clean ventilation, and smaller healthcare sites near Gosport are no different.

Questions to ask before you book

  • Whether they’re fully insured
  • How VAT is shown on the quote
  • Exactly which parts of the system are covered
  • How areas they can’t reach will be recorded

Choosing a duct cleaning contractor

When it’s something else

Some problems need a different service or another trade:

  • Ventilation that was badly designed in the first place
  • Mechanical faults with motors, belts or bearings
  • Controls and BMS settings that run the unit

Not sure which it is? You can call 0345 646 2711, or email photos and we will tell you honestly before booking.

Parts of the system we cover

  • Heating and cooling coils
  • Filter sections
  • Internal panels
  • Drain trays
  • Dampers and louvres
  • Supply and extract fans

Multi-site and managed buildings

Keeping records across a portfolio is half the battle. Every visit ends with a dated report and pictures, ready to show insurers, fire officers or EHOs.

Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.

What staff can safely do

In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.

Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but the parts you can’t see still need a specialist at the right interval.

How it works

We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that is an evening, overnight or a weekend. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the job takes from a few hours for a compact unit to a day or more for a large one. We agree a date with you, plan the drive to Gosport and turn up when the site is quiet.

  1. The survey covers the unit, its access and how it can be shut down.
  2. The area is protected and the unit made safe.
  3. Each section is cleaned of dust, debris and slime.
  4. Coils and trays are cleaned and the condensate drain cleared.
  5. We close every panel, hand the unit back and send the report and certificate.

Before we arrive

  • Plan for cooking equipment or plant to be off before we arrive
  • Clear the space around the work
  • Let us know how we reach the system, including roofs, risers and plant rooms

How to get a quote

Some systems can be priced from pictures; others need a survey. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, the quote is fixed before any work is booked.

Ask for a quote

Advice

Gosport: your questions answered

Do you work at weekends in Gosport?

Yes, nights and weekends are routine for us. The site is handed back ready to open. When you call us on 0345 646 2711, or send details by email, mention when the site is quiet.

Do you work in villages like Gosport?

Yes, we work in villages as well as towns, and Gosport is covered. The journey is planned ahead, so a few details about the route help.

How long will the unit be out of action?

It takes one overnight shift for many single units, with bigger plant phased. The unit’s size and condition make the biggest difference, and the quote will give you a clear idea.

What does TR19 mean?

TR19® is the BESA specification for keeping ventilation systems clean. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.

Which kinds of sites do you work on?

All kinds of commercial and public premises: from restaurants, pubs and hotels to schools, hospitals, care homes, offices, shops and food production sites. We fit the work around how the site operates.

Do you offer emergency callouts?

Yes, 24/7. Office hours are Monday to Friday, 8am to 6pm, and the emergency line covers the rest.

How do you protect the area?

We cover floors and nearby surfaces with sheeting before any work starts, and anything we remove is contained. At the end, the area is cleaned down.

Do you give a certificate after the clean?

Yes. A TR19® certificate and photo report are sent after the clean, including anything we think needs attention.

Between visits

Looking after the system between visits is straightforward, and it helps at the next visit:

  • Make sure the unit’s access doors open easily
  • Do not ignore odours coming through the grilles
  • Keep the area around the fresh air intake clear
  • Look at the condensate drain whenever the unit is serviced

You receive a TR19® certificate and a photo report after the clean. Keep both with the building’s maintenance records.

Keep the area around the intake clear. Anything around the intake is likely to be drawn in.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London