Kent · Air handling unit cleaning
Garlinge AHU cleaning
We cover Garlinge for AHU cleaning. Fixed quotes, work around your opening hours and photo reports on every job.
- Dirty fans and fan housings
- Dirty filters cutting the airflow
- Dirty coils holding back the airflow
In-house cleaning or a specialist?
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, alongside our reports.
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.
AHU cleaning in Garlinge, done properly
We clean the parts of the unit where dirt and moisture gather: the filter section, heating and cooling coils, drain trays, fan and casing. Every clean comes with a TR19® certificate and before and after photos in a report. The work covers supply and extract fans, filter sections and dampers and louvres, and common reasons people get in touch are dirty filters cutting the airflow and plant that has been serviced but not cleaned.
Around a place like Garlinge, ventilation systems tend to be in schools, surgeries, care homes and workplaces. Even a small system collects dust in its ducts and filters.
The sign-off is always in writing: a written report, dated and illustrated with photos, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Place
- Garlinge (CT9, CT8)
- Wider area
- Kent
- Reporting
- Written report with pictures
- Quotes
- Fixed quote, normally within a working day
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Updated
- 30 October 2026
What we do, step by step
Everything the job needs comes with us, from protective sheeting to tools and access equipment. You only need to give us clear access and switch off what needs to be off. The visit takes half a day to a full day per unit, with large plant planned over several shifts. Tell us when your site near Garlinge is quiet and the visit will be booked for then.
- We survey the unit from photos or on site and agree what’s included.
- With your site team, the unit is switched off and isolated, then the area around it protected.
- Filters are dealt with as agreed, and the coils, fan and casing cleaned.
- Standing water and slime come out of the tray and the drain is checked.
- We close up the unit and send the certificate and before and after photos.
Before we arrive
- Allow time for equipment near the work to be turned off and cool down
- Tell us where we can park and unload
- Clear loose items from the work area
Getting a quote
To get a fixed quote, call us on 0345 646 2711 or send us an email and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. We normally come back within one working day.
Read more
Common questions in Garlinge
Do you work in villages like Garlinge?
Yes, we work in villages as well as towns, and Garlinge is covered. Just mention lanes, gates or anything else about the site when you book.
Do you work overnight in Garlinge?
Yes, nights and weekends are routine for us. That way a site in Garlinge doesn’t have to lose a day’s trading. Your opening times are the first thing we ask for.
What do you do with what you remove?
Waste is contained during the work and removed when we leave, including grease, debris and dirty water. None of it is left on site.
Do you have a 24/7 line?
Yes, any time. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line, and we’ll advise on what to do next.
How long does an AHU clean take?
Typically the clean takes from a few hours for a compact unit to a day or more for a large one. The shutdown is planned to fit, out of hours if needed.
Can you price the work without visiting?
Often, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Larger or hidden systems need a survey on site first.
What’s TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It is not legislation, but it’s the standard people check against.
What accreditations do you have?
Our accreditations are CHAS, SafeContractor and ISO 9001, and we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
What the work involves, part by part
Filters
Dirty filters cut airflow and let dirt slip past their frames. The filter section is cleaned so new or cleaned filters sit properly.
Rooftop and plant room units
Rooftop units take the weather, and intakes can collect leaves and debris. We clean the intake and first stage of filters along with the rest.
More services for Garlinge
AHU cleaning in Garlinge: local notes
Food Standards Agency records list about 12 schools, colleges and universities, about 21 care, childcare and hospital premises and about 4 hotels and B&Bs registered as food businesses within 1.5 miles or so of the middle of Garlinge. Buildings like these often rely on mechanical ventilation, which TR19® Air covers. The nearest hospital to Garlinge is Queen Elizabeth the Queen Mother Hospital, about 1.5 miles east. If you run a surgery, clinic or care home, your ventilation deserves the same care as a hospital’s, on a smaller scale.
If you manage offices or shops near Margate station, their ventilation can be inspected and cleaned out of hours. School buildings such as Garlinge Primary School and Nursery are typically done in the holidays, so classrooms are not disturbed.
Garlinge is about 1 mile west of Margate, in Kent. If you need AHU cleaning in Garlinge, please call us on 0345 646 2711 or email us for a fixed quote. Our area covers London and the South East, including Garlinge. Our area takes in 922 places across Kent, large and small. You can also see our page for Maidstone, about 37 miles away.
Postcode districts we cover here for AHU cleaning: CT9 and CT8. We cover sites on High Street, Bridge Road and Caxton Road and nearby roads. If your site is just outside Garlinge, we cover Westbrook (1 mile north-east), Westgate-on-Sea (1 mile west), Flete (1 mile south-east), Margate (1 mile east) and Westwood (2 miles south-east). Within a short drive, we also cover Canterbury (14 miles south-west), Ramsgate (4 miles south-east), Broadstairs (3 miles east), Whitstable (14 miles west), Deal (11 miles south) and Herne Bay (10 miles west).
Around Garlinge
We work in commercial kitchens and buildings around Hartsdown Academy. The closest station to Garlinge is Margate station, roughly 0.8 miles north-east. A little further out are Westwood Cross (2.2 miles south-east) and Margate Old Town Local History Museum (1.3 miles north-east). Open spaces near Garlinge include Sandwich and Pegwell Bay.
When to call us in Garlinge
Mechanical servicing keeps a unit running, but it does not always include cleaning the inside. So a unit can be well maintained and still dirty.
Look out for these warning signs:
- Debris and leaves in the fresh air intake
- Coils clogged with dust and debris
- Rooms that smell stuffy when the system runs
- Units that have only ever had filter changes
Healthcare buildings such as Queen Elizabeth the Queen Mother Hospital, about 1.5 miles east, depend on their ventilation; if you manage a surgery, clinic or care home near Garlinge, yours matters too.
What to look for in a quote
- Whether they’re fully insured
- How areas they cannot reach will be recorded
- How they set the interval to the next visit
- What records you will receive afterwards
Between visits
Results last longer with the right care. We suggest:
- Flag stale or damp smells in the supply air
- Keep the certificate and photo report with the plant records
- Report stiff or damaged access doors
- Plan the next inspection before the last report gets filed away
Keep filter changes on schedule between cleans, because good filters protect everything downstream. Log every change so it’s easy to see when the next is due.
Change or clean filters on time. Overloaded filters let more dirt through to the coils and fan.
Honest limits
We won’t sell you work that doesn’t address the problem, so these are the things it will not cover:
- Damaged coils beyond cleaning
- Ventilation that was badly designed in the first place
- The supply and extract ducts, quoted separately
If you’re not sure, just call us on 0345 646 2711, or send details by email and we will give you a straight answer.
What the work covers
- Internal panels
- Dampers and louvres
- Filter sections
- Supply and extract fans
- Heating and cooling coils
- Drain trays
Landlords, agents and facilities managers
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.
If you look after several sites, we can schedule visits across all of them on one quote. Every building has its own written report, so records stay tidy.