Kent · Air handling unit cleaning
AHU Cleaning in Conyer
We cover Conyer for cleaning of air handling units, including filters, coils, drain trays, fans and internal surfaces. Fixed quotes, work around your opening hours and photo reports as standard.
- Units that have only ever had filter changes
- Leaves and litter drawn into the unit
- Units needing a clean before a new tenant or handover
How we handle AHU cleaning in Conyer
Heating and cooling coils trap dust that gets past the filters. A coated coil restricts airflow and makes the unit work harder. We clean coils with methods suited to their condition, taking care not to damage the fins. Common call-outs are for dirty filters cutting the airflow and intake sections clogged with outdoor debris, on drain trays, internal panels and filter sections.
In a village or hamlet like Conyer, few buildings have mechanical ventilation, but where it’s fitted, it needs the same inspection and cleaning as anywhere.
Each visit ends with a written report and pictures, so there’s a dated record of the work. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Location
- Conyer (ME9)
- Region
- Kent
- Paperwork
- Photo report after each visit
- Price
- A fixed quote up front
- When we work
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Updated
- 30 October 2026
Aftercare tips
No system stays clean for ever, but care slows the build-up. Our tips:
- Keep filter changes on time and recorded
- Clear leaves and litter away from the intake
- Check the drain tray is emptying during routine visits
- Note any water around the unit or leaks below it
The report suggests a date for the next inspection or clean, taking into account how dirty it was. Under TR19® Air the timing is set by inspection and risk, not a fixed calendar.
Keep the area around the intake clear. Anything around the intake is likely to be drawn in.
Questions from Conyer
Is AHU cleaning available in Conyer?
Yes. We work across London and the South East, and Conyer is part of that. Just call us on 0345 646 2711 or drop us a line with a few details of the site.
Can the work in Conyer be done at night or at weekends?
Yes, out-of-hours work is a big part of what we do. The site is handed back ready to open. When you ring 0345 646 2711 or drop us a line, mention when the site is quiet.
Can we book visits on a schedule?
Yes. Plans on a 3, 6 or 12-monthly cycle are available, depending on what the system needs.
Do you repair air handling units?
AHU cleaning is what we offer here, not mechanical repairs. If we spot a fault, we note it in the report for your maintenance team to follow up.
Do you need to switch the unit off?
Yes, for the time we are working on it. We can work evenings, overnight or at weekends so the building is not left without ventilation when it’s busy.
Can you price the work without visiting?
Often, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Larger or hidden systems need a survey on site first.
Which parts of an air handling unit do you clean?
Filters, coils, drain trays, the fan and the internal surfaces are all covered. What happens to the filters is agreed when we quote.
Can you look after several sites?
Yes. One number covers all your sites in our area, and visits can be set on a regular cycle.
Ventilation in Conyer buildings
Food Standards Agency records list about 3 hospitals, care homes and childcare premises registered as food businesses within roughly a mile and a half of the centre of Conyer. Many buildings of this kind have supply and extract ductwork that gathers dust and needs inspecting. Conyer, about 41 miles from central London, is within our usual area. Evening, overnight and weekend visits are all possible.
In Conyer, supply and extract ducts are cleaned along with the units that serve them.
Conyer is about 4 miles east of Sittingbourne, in Kent. If you need AHU cleaning in Conyer, it’s easy to get a fixed quote: please give us a ring on 0345 646 2711, or send details by email. Our area covers London and the South East, including Conyer. Conyer is one of 922 towns, villages and districts in Kent where we work for AHU cleaning. There’s also a page for Maidstone, roughly 14 miles from Conyer.
We cover every part of ME9 for AHU cleaning and the roads nearby. Streets in the area include North Quay and Conyer Road, and we cover them all for AHU cleaning. If your site is just outside Conyer, we cover Teynham Street (1 mile south-east), Deerton Street (1 mile south-east), Teynham (1 mile south), Norton Ash (2 miles south) and Lewson Street (2 miles south). Larger places within reach include Maidstone (14 miles south-west), Ashford (15 miles south), Canterbury (12 miles south-east), Sittingbourne (4 miles west), Whitstable (9 miles east) and Faversham (4 miles south-east).
What’s near Conyer
For rail, the closest station is Teynham station, roughly 1.1 miles south of the centre. Other landmarks nearby include Dolphin Sailing Barge Museum (3.1 miles west) and Castle Rough (2.8 miles west).
When something else is needed
AHU cleaning cannot fix everything, and we’d rather say so up front. It does not solve:
- Dirty ducts beyond the unit itself
- Mechanical faults with motors, belts or bearings
- Controls and BMS settings that run the unit
If in doubt, phone us on 0345 646 2711 or email us and we’ll say what we think before you book.
What the work covers
- Supply and extract fans
- Drain trays
- Heating and cooling coils
- Internal panels
- Filter sections
- Dampers and louvres
More services for Conyer
Staff cleaning versus specialist work
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. That’s our job.
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. The inside of ducts and units needs a specialist.
What happens if it’s left?
A clean unit feeds cleaner air into the ductwork, so the whole system stays cleaner for longer. That makes the next inspection of a building in Conyer simpler. It’s simpler to plan the work at Conyer now than to arrange it in a hurry later.
Every site is different, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.
Why Conyer businesses choose us
- Evenings, overnight and weekends, plus 24/7 emergency callout
- Fixed quotes from a survey or photos
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Every job surveyed first
Part by part
Fans and fan sections
Dust on a fan impeller adds weight and wear. A clean fan runs more smoothly.
Filters
Dirty filters cut airflow and let dirt slip past their frames. We clean the frames and rails so the filters sit tight.
What we are called out for in Conyer
An overdue filter loads up with dirt, which cuts the airflow and can let air slip round the filter. After that, the coils and fan collect what the filter should have caught.
Most sites get in touch when they notice one of these:
- Plant that has been serviced but not cleaned
- Blocked condensate drains and slimy trays
- Stale or musty smells from the ventilation
- Intake sections clogged with outdoor debris
An inspection comes first for any ventilation job around Conyer, so the cleaning matches what’s there.
Comparing quotes
- When they can work, and whether that is outside your opening hours
- Proof of accreditation you can verify
- Whether the quote shows VAT
- Whether a written report and pictures are included
The process
Our technicians bring everything the work needs, including protection sheets, the right tools and access kit. You only need to give us clear access and switch off what needs to be off. The visit takes half a day to a full day per unit, with large plant planned over several shifts. For a village or hamlet like Conyer, tell us about narrow lanes, gates and parking when you book.
- We look at the unit and the plant area during the survey.
- The area is protected and the unit made safe.
- Each section is cleaned of dust, debris and slime.
- We clean the coils and clear the tray and drain.
- The unit is closed up and handed back, with a report to follow.
How to prepare
- Let us know how we reach the system, including roofs, risers and plant rooms
- Agree a time when the area can be out of use
- Arrange a key holder or contact on site
How to get a quote
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before any work starts.